KiloHearts Disperser V1001 WiN And OSX

How to Use KiloHearts Disperser V1.001 for WiN and OSX to Enhance Your Sound

KiloHearts Disperser V1.001 is a magic all-pass filter that can rotate the phases of your signal to create frequency sweeps, transient shaping, and bass enhancement. It works on both Windows and Mac OS platforms, and can be used as a standalone plugin or as a snapin in the KiloHearts Multipass or Snap Heap hosts.

In this article, we will show you how to use KiloHearts Disperser V1.001 for WiN and OSX to achieve different effects on your sound, such as:

Reducing the crest factor of a signal to get more headroom and clarity

Transforming sharp transients from clicks to zaps

Making drums sound louder and boomier

Making synth basses sound thicker and fatter

Let's get started!

Reducing the Crest Factor of a Signal

The crest factor is the ratio between the peaks of a signal and the overall power of the signal. A high crest factor means that the signal has high peaks but does not sound very loud. This can be a problem for vocals, guitars, or other sounds that need to cut through the mix.

KiloHearts Disperser V1.001 can help you reduce the crest factor of a signal by adding a little bit of phase offset to it. This will lower the peaks without lowering the volume or changing the sound very much.

To do this, simply load KiloHearts Disperser V1.001 on your track and set the amount knob to a low value (around 10% or less). You can adjust the frequency slider to fine-tune the effect on different frequency bands. You should notice that your signal sounds more balanced and clear.

Transforming Sharp Transients from Clicks to Zaps

KiloHearts Disperser V1.001 can also be used as a frequency-aware transient shaper. It can transform sharp transients from clicks into short zaps by delaying the low frequencies more than the high ones.

This can be useful for adding some character and punch to drums, percussion, or other sounds with strong transients.

To do this, load KiloHearts Disperser V1.001 on your track and set the amount knob to a medium value (around 50% or more). You can adjust the frequency slider to target the desired frequency range for the effect. You can also use the pinch knob to concentrate the delay around the cutoff frequency.

You should notice that your transients sound more snappy and crisp.

Making Drums Sound Louder and Boomier

KiloHearts Disperser V1.001 can also be used to make drums sound louder and boomier by smearing high-energy transients through space and time without modifying the gain of the sound.

This can be useful for creating some really loud and booming drums that sound larger than life.

To do this, load KiloHearts Disperser V1.001 on your drum track or bus and set the amount knob to a high value (around 80% or more). You can adjust the frequency slider to focus on the low-end frequencies for the effect. You can also use the pinch knob to create some resonance around the cutoff frequency.

You should notice that your drums sound more powerful and full.

Making Synth Basses Sound Thicker and Fatter

KiloHearts Disperser V1.001 can also do magical things to synth bass sounds by delaying the low frequencies more than the high ones.

This can be useful for making synth basses sound thicker and fatter without adding any distortion or compression.

To do this, load KiloHearts Disperser V1.001 on your synth bass track and set the amount knob to a high value (around 80% or more). You can adjust the frequency slider to target the bass frequencies for the effect. You can also use the pinch knob to create some harmonics around the cutoff frequency.

You should notice that your synth bass 061ffe29dd