Vag Com 12.10.3 Cracked 28

Vag Com 12.10.3 Cracked 28

CLICK HERE === https://tinurll.com/2tAoFZ

How to Install and Use Vag Com 12.10.3 Cracked Software

Vag Com 12.10.3 is a diagnostic tool for Volkswagen, Audi, Seat and Skoda vehicles. It allows you to access and modify various parameters of your car's electronic systems, such as engine, transmission, ABS, airbag, steering, etc. You can also perform basic functions such as reading and clearing fault codes, resetting service intervals, adapting keys, coding modules, etc.

However, the official Vag Com software requires a licensed cable and a subscription fee to use all its features. If you want to save some money and use a cheaper cable or a clone cable, you will need a cracked version of the software that can bypass the license check. In this article, we will show you how to install and use Vag Com 12.10.3 cracked software on your Windows PC.

Step 1: Download Vag Com 12.10.3 Cracked Software

You can download Vag Com 12.10.3 cracked software from various sources on the internet, such as torrent sites or file sharing platforms. However, be careful of viruses and malware that may be hidden in the files. We recommend you to scan the files with an antivirus program before opening them.

One of the sources that we found is [^1^], where you can listen to a podcast that provides a link to download the software. Alternatively, you can also download it from [^2^], where you can find a PDF document that contains the link as well.

Step 2: Install Vag Com 12.10.3 Cracked Software

After downloading the software, you will need to unzip it to a folder on your PC. Then, run the setup.exe file and follow the instructions on the screen to install the software. You may need to restart your PC after the installation is complete.

Once the software is installed, you will need to copy the loader.exe file from the crack folder to the installation folder of Vag Com 12.10.3 (usually C:\Ross-Tech\VCDS). This file will allow you to run the software without a license.

Step 3: Connect Your Cable and Car

Before you run the software, you will need to connect your cable to your PC and your car's OBD-II port (usually located under the dashboard). Make sure your car's ignition is on but do not start the engine.

Then, go to your PC's device manager and check if your cable is recognized as a USB serial port (COM port). If not, you may need to install the driver for your cable from the CD that came with it or download it from the manufacturer's website.

Step 4: Run Vag Com 12.10.3 Cracked Software

To run the software, you will need to use the loader.exe file that you copied earlier. Do not use the VCDS.exe file or the shortcut on your desktop, as they will not work without a license.

Double-click on the loader.exe file and wait for a few seconds until the software opens. You should see a message saying "VCDS Release 12.10.3 Interface Not Found!" This means that the software is running in test mode and does not require a license.

Click on "Options" and select your cable's COM port from the drop-down menu. Then click on "Test" to check if your cable is working properly. You should see a message saying "Port Status: OK Interface: Found!" This means that your cable is compatible with the software.

Click on "Save" and then click on "Select Control Module" to access your car's electronic systems. You can now use all the features of Vag Com 12.10.3 cracked software as if you had a licensed cable.

Troubleshooting Tips

If you encounter any problems while using Vag Com 12.10.3 cracked software, here are some tips that may help you:

If you get an error message saying "VCDS Release 12.11 Interface Not 061ffe29dd